# File generated by xf86config. # # Copyright © 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the “Software”), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa # driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed # this out to me. 
# This XF86Config file is designed for use with the VESA framebuffer. # This generic interface should work with nearly all video cards # (although not every card will support every resolution). # With the new driver, it should no longer be required to have frame buffer # support in the kernel, or to run it on the console. # # Enjoy! # – volkerdi@slackware.com # # ********************************************************************** # Module section – this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** # ********************************************************************** # Server flags section. # ********************************************************************** # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard’s InputDevice section # ********************************************************************** # ********************************************************************** # Core Pointer’s InputDevice section # ********************************************************************** # Some examples of extended input devices # Section “InputDevice” # Identifier “spaceball” # Driver “magellan” # Option “Device” “/dev/cua0” # EndSection # # Section “InputDevice” # Identifier “spaceball2” # Driver “spaceorb” # Option “Device” “/dev/cua0” # EndSection # # Section “InputDevice” # Identifier “touchscreen0” # Driver “microtouch” # Option “Device” “/dev/ttyS0” # Option “MinX” “1412” # Option “MaxX” “15184” # Option “MinY” “15372” # Option “MaxY” “1230” # Option “ScreenNumber” “0” # Option “ReportingMode” “Scaled” # Option “ButtonNumber” “1” # Option “SendCoreEvents” # EndSection # # Section “InputDevice” # Identifier “touchscreen1” # Driver “elo2300” # Option “Device” “/dev/ttyS0” # Option “MinX” “231” # Option “MaxX” “3868” # Option “MinY” “3858” # Option “MaxY” “272” # Option “ScreenNumber” “0” # Option “ReportingMode” “Scaled” # Option “ButtonThreshold” “17” # Option “ButtonNumber” “1” # Option “SendCoreEvents” # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present # Auto-generated by mkxf86config # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the “-screen” # option. # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # “-layout” option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section “ServerLayout” # The Identifier line must be present # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include “CorePointer”, “CoreKeyboard” and # “SendCoreEvents”. Identifier “Simple Layout” Screen 0 “aticonfig-Screen[0]” 0 0 InputDevice “Mouse1” “CorePointer” InputDevice “Keyboard1” “CoreKeyboard” EndSection Section “Files” # The location of the RGB database. Note, this is the name of the # file minus the extension (like “.txt” or “.db”). There is normally # no need to change the default. # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don’t have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # # FontPath “/usr/lib/X11/fonts/CID/” # FontPath “/usr/lib/X11/fonts/Speedo/” # ModulePath can be used to set a search path for the X server modules. # The default path is shown here. # ModulePath “/usr/lib/xorg/modules” RgbPath “/usr/lib/X11/rgb” FontPath “/usr/lib/X11/fonts/local/” FontPath “/usr/lib/X11/fonts/misc/” FontPath “/usr/lib/X11/fonts/75dpi/:unscaled” FontPath “/usr/lib/X11/fonts/100dpi/:unscaled” FontPath “/usr/lib/X11/fonts/Type1/” FontPath “/usr/lib/X11/fonts/75dpi/” FontPath “/usr/lib/X11/fonts/100dpi/” FontPath “/usr/lib/X11/fonts/TTF/” FontPath “/usr/lib/X11/fonts/cyrillic/” FontPath “/usr/share/ghostscript/fonts/” EndSection Section “Module” # This loads the DBE extension module. # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. # This loads the font modules # This loads the GLX module Load “dbe” # Double buffer extension SubSection “extmod” Option “omit xfree86-dga” # don’t initialise the DGA extension EndSubSection Load “type1” Load “freetype” # Load “speedo” Load “glx” Load “dri” EndSection Section “InputDevice” # For most OSs the protocol can be omitted (it defaults to “Standard”). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option “Protocol” “Xqueue” # Set the keyboard auto repeat parameters. Not all platforms implement # this. # Option “AutoRepeat” “500 5” # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)). # Option “Xleds” “1 2 3” # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option “XkbDisable” # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a European # keyboard, you will probably want to use one of: # # Option “XkbModel” “pc102” # Option “XkbModel” “pc105” # # If you have a Microsoft Natural keyboard, you can use: # # Option “XkbModel” “microsoft” # # If you have a US “windows” keyboard you will want: # # Option “XkbModel” “pc104” # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # # or: # # # If you’d like to switch the positions of your capslock and # control keys, use: # # Option “XkbOptions” “ctrl:swapcaps” # These are the default XKB settings for XFree86 # # Option “XkbRules” “xfree86” # Option “XkbModel” “pc101” # Option “XkbLayout” “us” # Option “XkbVariant” “” # Option “XkbOptions” “” Identifier “Keyboard1” Driver “kbd” Option “Xkblayout” “pl” # EndSection Section “InputDevice” # Identifier and driver # On platforms where PnP mouse detection is supported the following # protocol setting can be used when using a newer PnP mouse: # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2 # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2 # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse # ThinkingMouse ThinkingMousePS/2 Xqueue # Option “Protocol” “PS/2” # The mouse device. The device is normally set to /dev/mouse, # which is usually a symbolic link to the real device. # Option “Device” “/dev/ttyS0” # Option “Device” “/dev/ttyS1” # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option “Protocol” “Xqueue” # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option “BaudRate” “9600” # Option “SampleRate” “150” # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option “ChordMiddle” Identifier “Mouse1” Driver “mouse” Option “Protocol” “Auto” # The available mouse protocols types that you can set below are: Option “Device” “/dev/mouse” # Option “Device” “/dev/psaux” Option “Emulate3Buttons” # Option “Emulate3Timeout” “50” # Option “ZaxisMapping” “4 5” Option “ZaxisMapping” “4 5” # ChordMiddle is an option for some 3-button Logitech mice EndSection Section “Monitor” # DDC-probed # DDC-probed # These are the DDC-probed settings reported by your monitor. # 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03 Identifier “Monitor0” VendorName “GSM” ModelName “GSM4396” HorizSync 30.0 - 71.0 VertRefresh 50.0 - 160.0 ModeLine “1280x1024” 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync ModeLine “1152x864” 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync ModeLine “1024x768” 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync ModeLine “1024x768” 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync ModeLine “1024x768” 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync ModeLine “1024x768” 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync ModeLine “800x600” 56.2 800 832 896 1048 600 601 604 631 +hsync +vsync ModeLine “800x600” 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync ModeLine “800x600” 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync ModeLine “800x600” 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync ModeLine “640x480” 36.0 640 696 752 832 480 481 484 509 -hsync -vsync ModeLine “640x480” 31.5 640 656 720 840 480 481 484 500 -hsync -vsync ModeLine “640x480” 31.5 640 656 696 816 480 481 484 504 -hsync -vsync ModeLine “640x480” 25.2 640 648 744 784 480 482 484 509 -hsync -vsync ModeLine “640x480” 43.2 640 680 744 848 480 481 484 509 -hsync +vsync ModeLine “768x576” 35.0 768 792 872 976 576 577 580 597 -hsync +vsync ModeLine “768x576” 42.9 768 800 880 992 576 577 580 601 -hsync +vsync ModeLine “768x576” 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync ModeLine “768x576” 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync ModeLine “768x576” 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync ModeLine “800x600” 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync ModeLine “1024x768” 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync ModeLine “1152x864” 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync ModeLine “1152x864” 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync ModeLine “1152x864” 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync ModeLine “1280x960” 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync ModeLine “1280x960” 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync ModeLine “1280x960” 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync ModeLine “1280x1024” 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync ModeLine “1400x1050” 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync ModeLine “1400x1050” 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync ModeLine “1400x1050” 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync ModeLine “1400x1050” 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync ModeLine “1400x1050” 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync ModeLine “1600x1200” 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync EndSection Section “Monitor” Identifier “aticonfig-Monitor[0]” Option “VendorName” “ATI Proprietary Driver” Option “ModelName” “Generic Autodetecting Monitor” Option “DPMS” “true” EndSection Section “Device” #VideoRam 4096 # Insert Clocks lines here if appropriate Identifier “VESA Framebuffer” Driver “vesa” EndSection Section “Device” Identifier “aticonfig-Device[0]” Driver “fglrx” EndSection Section “Screen” # If your card can handle it, a higher default color depth (like 24 or 32) # is highly recommended. # DefaultDepth 8 # DefaultDepth 16 # DefaultDepth 24 # DefaultDepth 32 # “1024x768” is also a conservative usable default resolution. If you # have a better monitor, feel free to try resolutions such as # “1152x864”, “1280x1024”, “1600x1200”, and “1800x1400” (or whatever your # card/monitor can produce) Identifier “Screen 1” Device “VESA Framebuffer” Monitor “Monitor0” DefaultDepth 24 SubSection “Display” Depth 8 Modes “1024x768” “800x600” “640x480” EndSubSection SubSection “Display” Depth 16 Modes “1024x768” “800x600” “640x480” EndSubSection SubSection “Display” Depth 24 Modes “1024x768” “800x600” “640x480” EndSubSection SubSection “Display” Depth 32 Modes “1024x768” “800x600” “640x480” EndSubSection EndSection Section “Screen” Identifier “aticonfig-Screen[0]” Device “aticonfig-Device[0]” Monitor “aticonfig-Monitor[0]” DefaultDepth 24 SubSection “Display” Viewport 0 0 Depth 24 EndSubSection EndSection