Sterowniki M-AUDIO C400 Ubuntu 19.04

Oprogramowanie komputerowe GNU/Linux
#1

System widzi kartę ale nie ma dźwięku. Proszę o pomoc.

Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 005: ID 0b05:17cb ASUSTek Computer, Inc. Broadcom BCM20702A0 Bluetooth
Bus 003 Device 004: ID 0763:2030 M-Audio
Bus 003 Device 003: ID 09da:13ff A4Tech Co., Ltd.
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

#2

Sprawdź czy działa daemon pulseaudio, np. przez ksysguard lub inny graficzny monitor systemu, albo wpisując do terminala (konsole, gnome-terminal lub odpowiednik):

pidof pulseaudio
ps aux | grep -i pulseaudio
#3

kajetan@kajetan-desktop:~/Pulpit$ ps aux | grep -i pulseaudio
kajetan 1179 0.0 0.2 1770152 19744 ? S<sl 17:58 0:00 /usr/bin/pulseaudio --daemonize=no
kajetan 8472 0.0 0.0 20156 2720 pts/0 S+ 18:21 0:00 grep --color=auto -i pulseaudio

#4

Spróbuj go ubić i uruchomić ponownie:

pulseaudio -k
pulseaudio &
#5

kajetan@kajetan-desktop:~/Pulpit$ pulseaudio -k
kajetan@kajetan-desktop:~/Pulpit$ pulseaudio &
[1] 2788
kajetan@kajetan-desktop:~/Pulpit$ E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() się nie powiodło.

#6

Spróbuj to samo ale na początku dopisz sudo i wtedy musisz wpisać hasło roota(admina) czasami pomaga.

sudo pulseaudio -k
sudo pulseaudio &

#7

kajetan@kajetan-desktop:~/Pulpit$ sudo pilseaudio -k
sudo: pilseaudio: nie znaleziono polecenia
kajetan@kajetan-desktop:~/Pulpit$ sudo pulseaudio &
[1] 7064
kajetan@kajetan-desktop:~/Pulpit$ W: [pulseaudio] main.c: Ten program nie powinien być uruchamiany w trybie administratora (chyba, że podano opcję --system).
E: [pulseaudio] core-util.c: Home directory not accessible: Brak dostępu

Nie ma jakiegoś programu do obsługi zewnętrznych kart dźwiękowych?

#8

Raczej nie.

literówka.

Spróbuj alsamixer

#9

Po wybraniu karty Fast Track C400 program się zawiesza i wyłącza.

1
1.png1245×737 102 KB

#10

W systemie niby normalnie działa…

2
2.png999×811 72.3 KB

#11

Wygląda jakby głośniki były nie aktywne. Otwórz ten podgląd co miałeś na zrzutce, a w terminalu zrób tak.

pactl set-sink-mute 1 toggle

Sprawdż, czy po tym głośniki się aktywują.

#12

To polecenie wyłącza opcje IEC958 (QasMixer) , nic to nie zmienia.

#13

A to.

pactl set-sink-mute 0 toggle

Jak dalej nieaktywne, to pokaż wyniki tego.

cat /proc/asound/modules

pactl list short sinks

#14

kajetan@kajetan:~/Pulpit$ cat /proc/asound/modules
0 snd_hda_intel
1 snd_usb_audio
2 snd_hda_intel
kajetan@kajetan:~/Pulpit$ pactl list short sinks
0 alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21 module-alsa-card.c s24le 3 k 44100 Hz RUNNING
1 alsa_output.pci-0000_00_1b.0.iec958-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED

#15

No niby coś tam odtwarza “RUNNING”, jako domyślna w pulseaudio. Ustawmy ją tak, aby była jako pierwsza nie tylko dla pulseaudio, ale dla całego systemu. Możesz użyć innego edytora tekstu niż nano, byle nie w jakimś procesorze tekstu. W pliku.

sudo nano /etc/modprobe.d/audio_karty.conf

Wpisz/skopiuj (spróbujemy bez ustawiania drugiej snd_hda_intel, i tak mam za mało danych na teraz):

options snd_usb_audio index=0
options snd_hda_intel index=-2

I zrestartuj komputer. Po ponownym uruchomieniu sprawdź kolejność.

cat /proc/asound/cards

pactl list short sinks

Jak nadal nie ma dźwięku, to pokaż wyniki.

cat /proc/asound/cards

lspci -nnm | egrep "Audio|audio"

lsusb -t
#16

kajetan@kajetan:~/Pulpit$ cat /proc/asound/cards
0 [C400 ]: USB-Audio - Fast Track C400
M-Audio Fast Track C400 at usb-0000:00:14.0-6, high speed
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf0410000 irq 29
2 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xf0060000 irq 30
kajetan@kajetan:~/Pulpit$ pactl list short sinks
0 alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21 module-alsa-card.c s24le 3 k 44100 Hz RUNNING
1 alsa_output.pci-0000_00_1b.0.iec958-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED
kajetan@kajetan:~/Pulpit$ lspci -nnm | egrep “Audio|audio”
00:1b.0 “Audio device [0403]” “Intel Corporation [8086]” “8 Series/C220 Series Chipset High Definition Audio Controller [8c20]” -r05 “ASRock Incorporation [1849]” “8 Series/C220 Series Chipset High Definition Audio Controller [8892]”
01:00.1 “Audio device [0403]” “Advanced Micro Devices, Inc. [AMD/ATI] [1002]” “Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [aab0]” “Micro-Star International Co., Ltd. [MSI] [1462]” “Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [aab0]”
kajetan@kajetan:~/Pulpit$ lsusb -t
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 480M
|__ Port 4: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 5: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 5: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 6: Dev 4, If 0, Class=Application Specific Interface, Driver=, 480M
|__ Port 6: Dev 4, If 1, Class=Vendor Specific Class, Driver=snd-usb-audio, 480M
|__ Port 6: Dev 4, If 2, Class=Vendor Specific Class, Driver=snd-usb-audio, 480M
|__ Port 6: Dev 4, If 3, Class=Vendor Specific Class, Driver=snd-usb-audio, 480M
|__ Port 6: Dev 4, If 4, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 6: Dev 4, If 5, Class=Human Interface Device, Driver=usbhid, 480M
|__ Port 9: Dev 5, If 1, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 9: Dev 5, If 2, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 9: Dev 5, If 0, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 9: Dev 5, If 3, Class=Application Specific Interface, Driver=, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M

#17

Czy status “RUNNING” na Audio_Fast_Track, nie zmienia się na inny?
Czy po tym (w jednej linii to jest),

pactl list short sinks ; pulseaudio -k ; pactl list short sinks ; sleep 5 ; pactl list short sinks

jest przez chwilę “IDLE” i zmienia się na “SUSPENDED”.

Jak zmieni się na stałe na “SUSPENDED”, to czy słychać krótki szum z tego.

aplay -D plughw:0 /usr/share/sounds/alsa/Noise.wav

Jak nie, to pokaż.

pacmd list-sinks

#18

gokaj@gokaj-desktop:~/Pulpit$ pactl list short sinks ; pulseaudio -k ; pactl list short sinks ; sleep 5 ; pactl list short sinks
0 alsa_output.pci-0000_01_00.1.hdmi-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED
1 alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21 module-alsa-card.c s24le 3 k 44100 Hz RUNNING
2 alsa_output.pci-0000_00_1b.0.iec958-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED
0 alsa_output.pci-0000_01_00.1.hdmi-stereo module-alsa-card.c s16le 2 k 44100 Hz IDLE
1 alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21 module-alsa-card.c s24le 3 k 44100 Hz IDLE
2 alsa_output.pci-0000_00_1b.0.iec958-stereo module-alsa-card.c s16le 2 k 44100 Hz IDLE
0 alsa_output.pci-0000_01_00.1.hdmi-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED
1 alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21 module-alsa-card.c s24le 3 k 44100 Hz SUSPENDED
2 alsa_output.pci-0000_00_1b.0.iec958-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED
gokaj@gokaj-desktop:~/Pulpit$ aplay -D plughw:0 /usr/share/sounds/alsa/Noise.wav
Odtwarza WAVE ‘/usr/share/sounds/alsa/Noise.wav’ : Signed 16 bit Little Endian, Częstotliwość 48000 Hz, Mono
gokaj@gokaj-desktop:~/Pulpit$ pacmd list-sinks
3 sink(s) available.
index: 0
name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2 k 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 … 371,52 ms
card: 0 <alsa_card.pci-0000_01_00.1>
module: 7
properties:
alsa.resolution_bits = “16”
device.api = “alsa”
device.class = “sound”
alsa.class = “generic”
alsa.subclass = “generic-mix”
alsa.name = “HDMI 0”
alsa.id = “HDMI 0”
alsa.subdevice = “0”
alsa.subdevice_name = “subdevice #0”
alsa.device = “3”
alsa.card = “2”
alsa.card_name = “HDA ATI HDMI”
alsa.long_card_name = “HDA ATI HDMI at 0xf0060000 irq 30”
alsa.driver_name = “snd_hda_intel”
device.bus_path = “pci-0000:01:00.1”
sysfs.path = “/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2”
device.bus = “pci”
device.vendor.id = “1002”
device.vendor.name = “Advanced Micro Devices, Inc. [AMD/ATI]”
device.product.id = “aab0”
device.product.name = “Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]”
device.string = “hdmi:2”
device.buffering.buffer_size = “65536”
device.buffering.fragment_size = “32768”
device.access_mode = “mmap+timer”
device.profile.name = “hdmi-stereo”
device.profile.description = “Digital Stereo (HDMI)”
device.description = “Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)”
alsa.mixer_name = “ATI R6xx HDMI”
alsa.components = “HDA:1002aa01,00aa0100,00100300”
module-udev-detect.discovered = “1”
device.icon_name = “audio-card-pci”
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
properties:
device.icon_name = “video-display”
active port:

  • index: 1
    name: <alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9049
    volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB, lfe: 0 / 0% / -inf dB
    balance 0,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 1
    sample spec: s24le 3 k 48000 Hz
    channel map: front-left,front-right,lfe
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 … 1213,62 ms
    card: 1 <alsa_card.usb-M-Audio_Fast_Track_C400-01>
    module: 8
    properties:
    alsa.resolution_bits = “24”
    device.api = “alsa”
    device.class = “sound”
    alsa.class = “generic”
    alsa.subclass = “generic-mix”
    alsa.name = “USB Audio”
    alsa.id = “USB Audio”
    alsa.subdevice = “0”
    alsa.subdevice_name = “subdevice #0”
    alsa.device = “0”
    alsa.card = “1”
    alsa.card_name = “Fast Track C400”
    alsa.long_card_name = “M-Audio Fast Track C400 at usb-0000:00:14.0-6, high speed”
    alsa.driver_name = “snd_usb_audio”
    device.bus_path = “pci-0000:00:14.0-usb-0:6:1.1”
    sysfs.path = “/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/sound/card1”
    udev.id = “usb-M-Audio_Fast_Track_C400-01”
    device.bus = “usb”
    device.vendor.id = “0763”
    device.vendor.name = “M-Audio”
    device.product.id = “2030”
    device.product.name = “Fast Track C400”
    device.serial = “M-Audio_Fast_Track_C400”
    device.string = “surround21:1”
    device.buffering.buffer_size = “524286”
    device.buffering.fragment_size = “262143”
    device.access_mode = “mmap+timer”
    device.profile.name = “analog-surround-21”
    device.profile.description = “Analogowe przestrzenne 2.1”
    device.description = “Fast Track C400 Analogowe przestrzenne 2.1”
    alsa.mixer_name = “USB Mixer”
    alsa.components = “USB0763:2030”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-usb”
    ports:
    analog-output: Wyjście analogowe (priority 9900, latency offset 0 usec, available: unknown)
    properties:

    active port:
    index: 2
    name: <alsa_output.pci-0000_00_1b.0.iec958-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9038
    volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
    balance 0,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 2
    sample spec: s16le 2 k 44100 Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 … 371,52 ms
    card: 2 <alsa_card.pci-0000_00_1b.0>
    module: 9
    properties:
    alsa.resolution_bits = “16”
    device.api = “alsa”
    device.class = “sound”
    alsa.class = “generic”
    alsa.subclass = “generic-mix”
    alsa.name = “ALC892 Digital”
    alsa.id = “ALC892 Digital”
    alsa.subdevice = “0”
    alsa.subdevice_name = “subdevice #0”
    alsa.device = “1”
    alsa.card = “0”
    alsa.card_name = “HDA Intel PCH”
    alsa.long_card_name = “HDA Intel PCH at 0xf0410000 irq 29”
    alsa.driver_name = “snd_hda_intel”
    device.bus_path = “pci-0000:00:1b.0”
    sysfs.path = “/devices/pci0000:00/0000:00:1b.0/sound/card0”
    device.bus = “pci”
    device.vendor.id = “8086”
    device.vendor.name = “Intel Corporation”
    device.product.id = “8c20”
    device.product.name = “8 Series/C220 Series Chipset High Definition Audio Controller”
    device.form_factor = “internal”
    device.string = “iec958:0”
    device.buffering.buffer_size = “65536”
    device.buffering.fragment_size = “32768”
    device.access_mode = “mmap+timer”
    device.profile.name = “iec958-stereo”
    device.profile.description = “Cyfrowe stereo (IEC958)”
    device.description = “Wbudowany dźwięk Cyfrowe stereo (IEC958)”
    alsa.mixer_name = “Realtek ALC892”
    alsa.components = “HDA:10ec0892,18498892,00100302”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-pci”
    ports:
    iec958-stereo-output: Wyjście cyfrowe (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
    properties:

    active port: iec958-stereo-output

#20

Czy karta audio usb dalej jest na pierwszych miejscach, sprawdź i pokaż.

cat /proc/asound/modules

cat /proc/asound/cards

Bo odtwarzanie przebiegało prawidłowo, to jest krótki szum. Jak tamto trwa za krótko to możesz puścić jakieś mp3 dla pierwszej karty to będzie tak (nie wiem czy mplayer jest domyślnie zainstalowany).

mplayer -ao alsa:device=hw=0 jakieś_plik_do_testu.mp3

Spróbuj przeładować moduł sterownika, co prawda nieprawidłowo dla wszystkich kart (bo index się zmienia u ciebie karta miała 0 ma 1), ale po pulseaudio -k (czy ponownym uruchomieniu) wszystkie ustawienia wrócą do starych.

pacmd unload-module module-alsa-card

załaduj nowy

pacmd load-module module-alsa-sink

Sprawdź.

#21

gokaj@gokaj-desktop:~/Pulpit$ pacmd list-sinks
3 sink(s) available.
index: 0
name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9030
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2 k 44100 Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 … 371,52 ms
card: 0 <alsa_card.pci-0000_01_00.1>
module: 7
properties:
alsa.resolution_bits = “16”
device.api = “alsa”
device.class = “sound”
alsa.class = “generic”
alsa.subclass = “generic-mix”
alsa.name = “HDMI 0”
alsa.id = “HDMI 0”
alsa.subdevice = “0”
alsa.subdevice_name = “subdevice #0”
alsa.device = “3”
alsa.card = “2”
alsa.card_name = “HDA ATI HDMI”
alsa.long_card_name = “HDA ATI HDMI at 0xf0060000 irq 30”
alsa.driver_name = “snd_hda_intel”
device.bus_path = “pci-0000:01:00.1”
sysfs.path = “/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2”
device.bus = “pci”
device.vendor.id = “1002”
device.vendor.name = “Advanced Micro Devices, Inc. [AMD/ATI]”
device.product.id = “aab0”
device.product.name = “Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]”
device.string = “hdmi:2”
device.buffering.buffer_size = “65536”
device.buffering.fragment_size = “32768”
device.access_mode = “mmap+timer”
device.profile.name = “hdmi-stereo”
device.profile.description = “Digital Stereo (HDMI)”
device.description = “Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)”
alsa.mixer_name = “ATI R6xx HDMI”
alsa.components = “HDA:1002aa01,00aa0100,00100300”
module-udev-detect.discovered = “1”
device.icon_name = “audio-card-pci”
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
properties:
device.icon_name = “video-display”
active port:

  • index: 1
    name: <alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9049
    volume: front-left: 41944 / 64% / -11,63 dB, front-right: 0 / 0% / -inf dB, lfe: 0 / 0% / -inf dB
    balance -1,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 1
    sample spec: s24le 3 k 44100 Hz
    channel map: front-left,front-right,lfe
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 … 1320,95 ms
    card: 1 <alsa_card.usb-M-Audio_Fast_Track_C400-01>
    module: 8
    properties:
    alsa.resolution_bits = “24”
    device.api = “alsa”
    device.class = “sound”
    alsa.class = “generic”
    alsa.subclass = “generic-mix”
    alsa.name = “USB Audio”
    alsa.id = “USB Audio”
    alsa.subdevice = “0”
    alsa.subdevice_name = “subdevice #0”
    alsa.device = “0”
    alsa.card = “0”
    alsa.card_name = “Fast Track C400”
    alsa.long_card_name = “M-Audio Fast Track C400 at usb-0000:00:14.0-6, high speed”
    alsa.driver_name = “snd_usb_audio”
    device.bus_path = “pci-0000:00:14.0-usb-0:6:1.1”
    sysfs.path = “/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/sound/card0”
    udev.id = “usb-M-Audio_Fast_Track_C400-01”
    device.bus = “usb”
    device.vendor.id = “0763”
    device.vendor.name = “M-Audio”
    device.product.id = “2030”
    device.product.name = “Fast Track C400”
    device.serial = “M-Audio_Fast_Track_C400”
    device.string = “surround21:0”
    device.buffering.buffer_size = “524286”
    device.buffering.fragment_size = “262143”
    device.access_mode = “mmap+timer”
    device.profile.name = “analog-surround-21”
    device.profile.description = “Analogowe przestrzenne 2.1”
    device.description = “Fast Track C400 Analogowe przestrzenne 2.1”
    alsa.mixer_name = “USB Mixer”
    alsa.components = “USB0763:2030”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-usb”
    ports:
    analog-output: Wyjście analogowe (priority 9900, latency offset 0 usec, available: unknown)
    properties:

    active port:
    index: 2
    name: <alsa_output.pci-0000_00_1b.0.iec958-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9038
    volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
    balance 0,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 2
    sample spec: s16le 2 k 44100 Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 … 371,52 ms
    card: 2 <alsa_card.pci-0000_00_1b.0>
    module: 9
    properties:
    alsa.resolution_bits = “16”
    device.api = “alsa”
    device.class = “sound”
    alsa.class = “generic”
    alsa.subclass = “generic-mix”
    alsa.name = “ALC892 Digital”
    alsa.id = “ALC892 Digital”
    alsa.subdevice = “0”
    alsa.subdevice_name = “subdevice #0”
    alsa.device = “1”
    alsa.card = “1”
    alsa.card_name = “HDA Intel PCH”
    alsa.long_card_name = “HDA Intel PCH at 0xf0410000 irq 29”
    alsa.driver_name = “snd_hda_intel”
    device.bus_path = “pci-0000:00:1b.0”
    sysfs.path = “/devices/pci0000:00/0000:00:1b.0/sound/card1”
    device.bus = “pci”
    device.vendor.id = “8086”
    device.vendor.name = “Intel Corporation”
    device.product.id = “8c20”
    device.product.name = “8 Series/C220 Series Chipset High Definition Audio Controller”
    device.form_factor = “internal”
    device.string = “iec958:1”
    device.buffering.buffer_size = “65536”
    device.buffering.fragment_size = “32768”
    device.access_mode = “mmap+timer”
    device.profile.name = “iec958-stereo”
    device.profile.description = “Cyfrowe stereo (IEC958)”
    device.description = “Wbudowany dźwięk Cyfrowe stereo (IEC958)”
    alsa.mixer_name = “Realtek ALC892”
    alsa.components = “HDA:10ec0892,18498892,00100302”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-pci”
    ports:
    iec958-stereo-output: Wyjście cyfrowe (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
    properties:

    active port:
    gokaj@gokaj-desktop:~/Pulpit$ pactl list short sinks ; pulseaudio -k ; pactl list short sinks ; sleep 5 ; pactl list short sinks
    0 alsa_output.pci-0000_01_00.1.hdmi-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED
    1 alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21 module-alsa-card.c s24le 3 k 44100 Hz SUSPENDED
    2 alsa_output.pci-0000_00_1b.0.iec958-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED
    0 alsa_output.pci-0000_01_00.1.hdmi-stereo module-alsa-card.c s16le 2 k 44100 Hz IDLE
    1 alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21 module-alsa-card.c s24le 3 k 44100 Hz IDLE
    2 alsa_output.pci-0000_00_1b.0.iec958-stereo module-alsa-card.c s16le 2 k 44100 Hz IDLE
    0 alsa_output.pci-0000_01_00.1.hdmi-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED
    1 alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21 module-alsa-card.c s24le 3 k 44100 Hz SUSPENDED
    2 alsa_output.pci-0000_00_1b.0.iec958-stereo module-alsa-card.c s16le 2 k 44100 Hz SUSPENDED
    gokaj@gokaj-desktop:~/Pulpit$ aplay -D plughw:0 /usr/share/sounds/alsa/Noise.wav
    Odtwarza WAVE ‘/usr/share/sounds/alsa/Noise.wav’ : Signed 16 bit Little Endian, Częstotliwość 48000 Hz, Mono
    gokaj@gokaj-desktop:~/Pulpit$ pacmd list-sinks
    3 sink(s) available.
    index: 0
    name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9030
    volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
    balance 0,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 0
    sample spec: s16le 2 k 44100 Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 … 371,52 ms
    card: 0 <alsa_card.pci-0000_01_00.1>
    module: 7
    properties:
    alsa.resolution_bits = “16”
    device.api = “alsa”
    device.class = “sound”
    alsa.class = “generic”
    alsa.subclass = “generic-mix”
    alsa.name = “HDMI 0”
    alsa.id = “HDMI 0”
    alsa.subdevice = “0”
    alsa.subdevice_name = “subdevice #0”
    alsa.device = “3”
    alsa.card = “2”
    alsa.card_name = “HDA ATI HDMI”
    alsa.long_card_name = “HDA ATI HDMI at 0xf0060000 irq 30”
    alsa.driver_name = “snd_hda_intel”
    device.bus_path = “pci-0000:01:00.1”
    sysfs.path = “/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2”
    device.bus = “pci”
    device.vendor.id = “1002”
    device.vendor.name = “Advanced Micro Devices, Inc. [AMD/ATI]”
    device.product.id = “aab0”
    device.product.name = “Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]”
    device.string = “hdmi:2”
    device.buffering.buffer_size = “65536”
    device.buffering.fragment_size = “32768”
    device.access_mode = “mmap+timer”
    device.profile.name = “hdmi-stereo”
    device.profile.description = “Digital Stereo (HDMI)”
    device.description = “Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)”
    alsa.mixer_name = “ATI R6xx HDMI”
    alsa.components = “HDA:1002aa01,00aa0100,00100300”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-pci”
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
    properties:
    device.icon_name = “video-display”
    active port:

  • index: 1
    name: <alsa_output.usb-M-Audio_Fast_Track_C400-01.analog-surround-21>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: RUNNING
    suspend cause: (none)
    priority: 9049
    volume: front-left: 65536 / 100% / 0,00 dB, front-right: 0 / 0% / -inf dB, lfe: 0 / 0% / -inf dB
    balance -1,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 24,60 ms
    max request: 9 KiB
    max rewind: 9 KiB
    monitor source: 1
    sample spec: s24le 3 k 44100 Hz
    channel map: front-left,front-right,lfe
    used by: 1
    linked by: 1
    configured latency: 23,22 ms; range is 0,50 … 1320,95 ms
    card: 1 <alsa_card.usb-M-Audio_Fast_Track_C400-01>
    module: 8
    properties:
    alsa.resolution_bits = “24”
    device.api = “alsa”
    device.class = “sound”
    alsa.class = “generic”
    alsa.subclass = “generic-mix”
    alsa.name = “USB Audio”
    alsa.id = “USB Audio”
    alsa.subdevice = “0”
    alsa.subdevice_name = “subdevice #0”
    alsa.device = “0”
    alsa.card = “0”
    alsa.card_name = “Fast Track C400”
    alsa.long_card_name = “M-Audio Fast Track C400 at usb-0000:00:14.0-6, high speed”
    alsa.driver_name = “snd_usb_audio”
    device.bus_path = “pci-0000:00:14.0-usb-0:6:1.1”
    sysfs.path = “/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/sound/card0”
    udev.id = “usb-M-Audio_Fast_Track_C400-01”
    device.bus = “usb”
    device.vendor.id = “0763”
    device.vendor.name = “M-Audio”
    device.product.id = “2030”
    device.product.name = “Fast Track C400”
    device.serial = “M-Audio_Fast_Track_C400”
    device.string = “surround21:0”
    device.buffering.buffer_size = “524286”
    device.buffering.fragment_size = “262143”
    device.access_mode = “mmap+timer”
    device.profile.name = “analog-surround-21”
    device.profile.description = “Analogowe przestrzenne 2.1”
    device.description = “Fast Track C400 Analogowe przestrzenne 2.1”
    alsa.mixer_name = “USB Mixer”
    alsa.components = “USB0763:2030”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-usb”
    ports:
    analog-output: Wyjście analogowe (priority 9900, latency offset 0 usec, available: unknown)
    properties:

    active port:
    index: 2
    name: <alsa_output.pci-0000_00_1b.0.iec958-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9038
    volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
    balance 0,00
    base volume: 65536 / 100% / 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 2
    sample spec: s16le 2 k 44100 Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 … 371,52 ms
    card: 2 <alsa_card.pci-0000_00_1b.0>
    module: 9
    properties:
    alsa.resolution_bits = “16”
    device.api = “alsa”
    device.class = “sound”
    alsa.class = “generic”
    alsa.subclass = “generic-mix”
    alsa.name = “ALC892 Digital”
    alsa.id = “ALC892 Digital”
    alsa.subdevice = “0”
    alsa.subdevice_name = “subdevice #0”
    alsa.device = “1”
    alsa.card = “1”
    alsa.card_name = “HDA Intel PCH”
    alsa.long_card_name = “HDA Intel PCH at 0xf0410000 irq 29”
    alsa.driver_name = “snd_hda_intel”
    device.bus_path = “pci-0000:00:1b.0”
    sysfs.path = “/devices/pci0000:00/0000:00:1b.0/sound/card1”
    device.bus = “pci”
    device.vendor.id = “8086”
    device.vendor.name = “Intel Corporation”
    device.product.id = “8c20”
    device.product.name = “8 Series/C220 Series Chipset High Definition Audio Controller”
    device.form_factor = “internal”
    device.string = “iec958:1”
    device.buffering.buffer_size = “65536”
    device.buffering.fragment_size = “32768”
    device.access_mode = “mmap+timer”
    device.profile.name = “iec958-stereo”
    device.profile.description = “Cyfrowe stereo (IEC958)”
    device.description = “Wbudowany dźwięk Cyfrowe stereo (IEC958)”
    alsa.mixer_name = “Realtek ALC892”
    alsa.components = “HDA:10ec0892,18498892,00100302”
    module-udev-detect.discovered = “1”
    device.icon_name = “audio-card-pci”
    ports:
    iec958-stereo-output: Wyjście cyfrowe (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
    properties:

    active port:
    gokaj@gokaj-desktop:~/Pulpit$ cat /proc/asound/modules
    0 snd_usb_audio
    1 snd_hda_intel
    2 snd_hda_intel
    gokaj@gokaj-desktop:~/Pulpit$ cat /proc/asound/cards
    0 [C400 ]: USB-Audio - Fast Track C400
    M-Audio Fast Track C400 at usb-0000:00:14.0-6, high speed
    1 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xf0410000 irq 29
    2 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xf0060000 irq 30
    gokaj@gokaj-desktop:~/Pulpit$ pacmd unload-module module-alsa-card
    gokaj@gokaj-desktop:~/Pulpit$ pacmd load-module module-alsa-sink