W Win7 wiatrak chodzi cicho a w ubuntu ten sam procesor z wiatrakiem chodzi 2x głośniej… Co mogę zrobić? To występuje bez szczególnego stresu, na samym pulpicie po włączeniu komputera już wyje głośniej… 
Brak sterowników. U mnie jest tak na kompie i lapku.
Mimo iż jest już wiele obsługiwanego sprzętu to i tak brakuje wielu rzeczy.
Tak, tak sterowniki do wiatraka:
sudo apt-get install cpufrequtils lm-sensors
sudo sensors-detect
Potwierdzasz wszystkie zapytania enterem i potem daj wynik polecenia:
sensors && cpufreq-infodziekuje za zainteresowanie, jednak to chyba nie pomogło, wykonałem tę instalkę oraz to drugie polecenie z akceptacją wszystkich zapytań, oto wynik o który prosiłeś:
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
– Dodane 29.07.2012 (N) 10:39 –
mam wiatrak wersji BOX do procesora Intela E8400
Coś jest nie tak, pokaż:
uname -aTeraz, po ponownym uruchomieniu komputera to polecenie daje inny wynik:
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +51.0°C (high = +78.0°C, crit = +100.0°C)
Core 1: +51.0°C (high = +78.0°C, crit = +100.0°C)
it8718-isa-0290
Adapter: ISA adapter
in0: +1.09 V (min = +0.00 V, max = +4.08 V)
in1: +1.86 V (min = +0.00 V, max = +4.08 V)
in2: +3.42 V (min = +0.00 V, max = +4.08 V)
+5V: +3.06 V (min = +0.00 V, max = +4.08 V)
in4: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM
in5: +0.02 V (min = +0.00 V, max = +4.08 V)
in6: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM
in7: +3.06 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.30 V
fan1: 1691 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +38.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +46.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: -3.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
intrusion0: ALARM
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 160 us.
hardware limits: 2.00 GHz - 2.67 GHz
available frequency steps: 2.67 GHz, 2.00 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 2.00 GHz and 2.67 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 2.00 GHz.
cpufreq stats: 2.67 GHz:4,79%, 2.00 GHz:95,21% (1)
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 160 us.
hardware limits: 2.00 GHz - 2.67 GHz
available frequency steps: 2.67 GHz, 2.00 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 2.00 GHz and 2.67 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 2.00 GHz.
cpufreq stats: 2.67 GHz:4,79%, 2.00 GHz:95,21% (1)Rzeczywiście jest coś nie tak, bo procesor 95 % czasu pracuje jako 2 GHz, a obroty wiatraka są znacznie za duże, pokaż jeszcze wynik polecenia:
uname -a3.5.0-7-generic #7-Ubuntu SMP Tue Jul 31 08:33:41 UTC 2012 i686 i686 i386 GNU/Linux
– Dodane 06.04.2013 (So) 20:02 – Witam mam inny procesor, Core i5 3570k i dokładnie ten sam problem co na poprzednim, oto wynik polecenia sensors && cpufreq-info
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +38.0°C (high = +85.0°C, crit = +105.0°C)
Core 0: +34.0°C (high = +85.0°C, crit = +105.0°C)
Core 1: +36.0°C (high = +85.0°C, crit = +105.0°C)
Core 2: +38.0°C (high = +85.0°C, crit = +105.0°C)
Core 3: +38.0°C (high = +85.0°C, crit = +105.0°C)
radeon-pci-0100
Adapter: PCI adapter
temp1: +72.0°C
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 1.60 GHz - 3.40 GHz
available frequency steps: 3.40 GHz, 3.40 GHz, 3.30 GHz, 3.10 GHz, 3.00 GHz, 2.90 GHz, 2.80 GHz, 2.60 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 1.60 GHz and 3.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 3.40 GHz.
cpufreq stats: 3.40 GHz:35,49%, 3.40 GHz:0,55%, 3.30 GHz:1,17%, 3.10 GHz:0,64%, 3.00 GHz:0,47%, 2.90 GHz:0,59%, 2.80 GHz:1,43%, 2.60 GHz:0,36%, 2.50 GHz:0,53%, 2.40 GHz:0,91%, 2.20 GHz:0,30%, 2.10 GHz:0,41%, 2.00 GHz:0,29%, 1.90 GHz:0,70%, 1.70 GHz:0,23%, 1.60 GHz:55,93% (5271)
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 10.0 us.
hardware limits: 1.60 GHz - 3.40 GHz
available frequency steps: 3.40 GHz, 3.40 GHz, 3.30 GHz, 3.10 GHz, 3.00 GHz, 2.90 GHz, 2.80 GHz, 2.60 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 1.60 GHz and 3.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.60 GHz.
cpufreq stats: 3.40 GHz:33,50%, 3.40 GHz:0,59%, 3.30 GHz:1,19%, 3.10 GHz:0,51%, 3.00 GHz:0,60%, 2.90 GHz:0,56%, 2.80 GHz:1,22%, 2.60 GHz:0,80%, 2.50 GHz:0,66%, 2.40 GHz:1,40%, 2.20 GHz:0,62%, 2.10 GHz:0,53%, 2.00 GHz:0,30%, 1.90 GHz:0,89%, 1.70 GHz:0,22%, 1.60 GHz:56,41% (5512)
analyzing CPU 2:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: 10.0 us.
hardware limits: 1.60 GHz - 3.40 GHz
available frequency steps: 3.40 GHz, 3.40 GHz, 3.30 GHz, 3.10 GHz, 3.00 GHz, 2.90 GHz, 2.80 GHz, 2.60 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 1.60 GHz and 3.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1.60 GHz.
cpufreq stats: 3.40 GHz:36,44%, 3.40 GHz:0,80%, 3.30 GHz:1,64%, 3.10 GHz:0,85%, 3.00 GHz:0,88%, 2.90 GHz:0,71%, 2.80 GHz:2,08%, 2.60 GHz:0,83%, 2.50 GHz:1,01%, 2.40 GHz:1,58%, 2.20 GHz:0,62%, 2.10 GHz:0,73%, 2.00 GHz:0,47%, 1.90 GHz:0,97%, 1.70 GHz:0,17%, 1.60 GHz:50,24% (6072)
analyzing CPU 3:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 3
maximum transition latency: 10.0 us.
hardware limits: 1.60 GHz - 3.40 GHz
available frequency steps: 3.40 GHz, 3.40 GHz, 3.30 GHz, 3.10 GHz, 3.00 GHz, 2.90 GHz, 2.80 GHz, 2.60 GHz, 2.50 GHz, 2.40 GHz, 2.20 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.70 GHz, 1.60 GHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 1.60 GHz and 3.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 3.30 GHz.
cpufreq stats: 3.40 GHz:33,69%, 3.40 GHz:0,47%, 3.30 GHz:1,24%, 3.10 GHz:0,60%, 3.00 GHz:0,61%, 2.90 GHz:0,70%, 2.80 GHz:2,17%, 2.60 GHz:0,97%, 2.50 GHz:0,99%, 2.40 GHz:1,12%, 2.20 GHz:0,48%, 2.10 GHz:0,33%, 2.00 GHz:0,32%, 1.90 GHz:0,68%, 1.70 GHz:0,17%, 1.60 GHz:55,45% (5697)
– Dodane 06.04.2013 (So) 20:37 –
OK już działa pomogło zainstalowanie najnowszego sterownika do Radeona Hd5770 przed instalacją tego sterownika sensory mi pokazywały temperaturę 76 stopni, teraz 59 i jest cicho…