Sklonowałem partycje ze starych dysków na nowy.
Zainstalowałem ponownie Minta wskazując odpowiednie partycje bez formatowania.
Już się ucieszyłem, że system wstał, ale nie działa myszka ani nie reaguje na włożenie pendirve’a!
O dziwo klawiatura USB działa, ale ciężko się poruszać bez myszki :’(
Kto wie co mogę zrobić?
PS Instalator nie znalazł również OpenSuse zainstalowanej na innej partycji…
Spróbuj przekonfigurować xorg. Jako root wydaj polecenie
Xorg -configure
Co powinno utworzyć plik /root/xorg.conf.new który następnie przekopiuj do /etc
cp /root/xorg.conf.new /etc/X11/xorg.conf
Teraz zrestartuj “iksy”, albo uruchom ponownie komputer.
1 polubienie
nierozpoznana opcja --configure
Racja, omyłkowo wpisałem za dużo myślników 
Sprawdziłem już z jednym myślnikiem,
Ale wyrzuca błąd, że serwer Xorg nadal działa a nie wiem jak go ubić?
Nie wiem z jakiego DM korzysta Mint, jeśli mdm to przełącz się np. na konsolę tty1 ([ctrl]+[alt]+[f1]) i wydaj polecenie:
sudo service mdm stop
analogicznie, jeśli jest kdm, gdm, lighdm czy jakikolwiek
ps.
Niech mnie poprawi ktoś kto zna systemd, bo mogłem nieprawidłową komendę podać.
Wynik:
no devices to configureTo usuń plik /etc/X11/xorg.conf Teoretycznie powinien się sam wygenerować przy starcie systemu
brak takiego pliku???
A co w ogóle mówią logi? Bo od tego raczej należałoby zacząć.
do jakich logów mam zajrzeć?
tzn gdzie i co szukać?
Racja, warto sprawdzić skoro na szybko nie da się tego naprawić
@Robin-Otzi Pokaż plik /var/log/Xorg.0.log, albo jego końcówkę jeśli jest długi, wystarczy pewnie ze 30 ostatnich linii.
No najlepiej do x’owych
/var/log/Xorg.0.log
albo pogrzeb ogólnie w
/var/log/
i przejrzyj boot, sys, kernel itp.
To pliki tekstowe.
Błąd “no devices…” może być także spowodowany brakiem paczki “linux-firmware”, albo jej zbyt starą wersją.
Edit:
Coś mi się przypomniało… A co siedzi w:
/etc/X11/xorg.conf.d/*.conf
Wrzucić tu zawartość poproszę
A w ogóle, najbardziej zastanawia mnie w całości to:
"Sklonowałem partycje ze starych dysków na nowy."
Co dokładnie autorze zrobiłeś i czym?
<img src="/uploads/default/original/3X/5/8/58b563674d54a83b9507dabaf829338aa518263a.png" width="182" height="500">[ 24.240]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 24.241] X Protocol Version 11 Revision 0
[ 24.241] Build Operating System: Linux 3.13.0-85-generic x86_64 Ubuntu
[ 24.241] Current Operating System: Linux Mint-Pollco 4.4.0-83-generic #106-Ubuntu SMP Mon Jun 26 17:54:43 UTC 2017 x86_64
[ 24.241] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-83-generic root=UUID=9afa65aa-a2b1-44ac-aa7c-f4e7e477a084 ro quiet splash vt.handoff=7
[ 24.241] Build Date: 07 April 2016 09:18:50AM
[ 24.241] xorg-server 2:1.18.3-1ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 24.241] Current version of pixman: 0.33.6
“[ 24.241] Before reporting problems” check http://wiki.x.org
" to make sure that you have the latest version."
[ 24.241] Markers: (–) probed () from config file (==) default setting
" (++) from command line" (!!) notice (II) informational
" (WW) warning" (EE) error (NI) not implemented (??) unknown.
[ 24.241] (==) Log file: “/var/log/Xorg.0.log” Time: Fri Jul 14 08:37:45 2017
[ 24.279] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 24.308] (==) No Layout section. Using the first Screen section.
[ 24.308] (==) No screen section available. Using defaults.
[ 24.309] () |–>Screen “Default Screen Section” (0)
[ 24.309] (**) | |–>Monitor “”
[ 24.331] (==) No monitor specified for screen “Default Screen Section”.
" Using a default monitor configuration."
[ 24.331] (==) Automatically adding devices
[ 24.331] (==) Automatically enabling devices
[ 24.331] (==) Automatically adding GPU devices
[ 24.331] (==) Max clients allowed: 256 resource mask: 0x1fffff
[ 24.331] (WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
“[ 24.331] Entry deleted from font path.”
[ 24.331] (WW) The directory “/usr/share/fonts/X11/100dpi/” does not exist.
“[ 24.331] Entry deleted from font path.”
[ 24.331] (WW) The directory “/usr/share/fonts/X11/75dpi/” does not exist.
“[ 24.331] Entry deleted from font path.”
[ 24.331] (WW) The directory “/usr/share/fonts/X11/100dpi” does not exist.
“[ 24.331] Entry deleted from font path.”
[ 24.331] (WW) The directory “/usr/share/fonts/X11/75dpi” does not exist.
“[ 24.331] Entry deleted from font path.”
[ 24.331] (==) FontPath set to:
" /usr/share/fonts/X11/misc"
" /usr/share/fonts/X11/Type1"
" built-ins"
[ 24.331] (==) ModulePath set to “/usr/lib/x86_64-linux-gnu/xorg/extra-modules /usr/lib/xorg/extra-modules /usr/lib/xorg/modules”
[ 24.331] (II) The server relies on udev to provide the list of input devices.
" If no devices become available" reconfigure udev or disable AutoAddDevices.
[ 24.331] (II) Loader magic: 0x55a34876eda0
[ 24.331] (II) Module ABI versions:
“[ 24.331] X.Org ANSI C Emulation: 0.4”
“[ 24.331] X.Org Video Driver: 20.0”
“[ 24.331] X.Org XInput driver : 22.1”
“[ 24.331] X.Org Server Extension : 9.0”
[ 24.333] (++) using VT number 8
[ 24.333] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided disabling logind integration
[ 24.335] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 24.338] (–) PCI:*(0:2:0:0) 1002:94c1:1028:0d02 rev 0 Mem @ 0xe0000000/268435456 0xf0100000/65536 I/O @ 0x00002100/256 BIOS @ 0x???/131072
[ 24.338] (II) LoadModule: “glx”
[ 24.363] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.702] (II) Module glx: vendor=“X.Org Foundation”
“[ 24.702] compiled for 1.18.3” module version = 1.0.0
“[ 24.702] ABI class: X.Org Server Extension” version 9.0
[ 24.702] (==) AIGLX enabled
[ 24.702] (==) Matched ati as autoconfigured driver 0
[ 24.702] (==) Matched ati as autoconfigured driver 1
[ 24.702] (==) Matched modesetting as autoconfigured driver 2
[ 24.702] (==) Matched fbdev as autoconfigured driver 3
[ 24.702] (==) Matched vesa as autoconfigured driver 4
[ 24.702] (==) Assigned the driver to the xf86ConfigLayout
[ 24.702] (II) LoadModule: “ati”
[ 24.737] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 24.763] (II) Module ati: vendor=“X.Org Foundation”
“[ 24.763] compiled for 1.18.3” module version = 7.7.0
“[ 24.763] Module class: X.Org Video Driver”
“[ 24.763] ABI class: X.Org Video Driver” version 20.0
[ 24.763] (II) LoadModule: “radeon”
[ 24.764] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 24.803] (II) Module radeon: vendor=“X.Org Foundation”
“[ 24.803] compiled for 1.18.3” module version = 7.7.0
“[ 24.803] Module class: X.Org Video Driver”
“[ 24.803] ABI class: X.Org Video Driver” version 20.0
[ 24.804] (II) LoadModule: “modesetting”
[ 24.804] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.826] (II) Module modesetting: vendor=“X.Org Foundation”
“[ 24.826] compiled for 1.18.3” module version = 1.18.3
“[ 24.826] Module class: X.Org Video Driver”
“[ 24.826] ABI class: X.Org Video Driver” version 20.0
[ 24.826] (II) LoadModule: “fbdev”
[ 24.827] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 24.830] (II) Module fbdev: vendor=“X.Org Foundation”
“[ 24.830] compiled for 1.18.1” module version = 0.4.4
“[ 24.830] Module class: X.Org Video Driver”
“[ 24.830] ABI class: X.Org Video Driver” version 20.0
[ 24.830] (II) LoadModule: “vesa”
[ 24.831] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 24.836] (II) Module vesa: vendor=“X.Org Foundation”
“[ 24.836] compiled for 1.18.1” module version = 2.3.4
“[ 24.836] Module class: X.Org Video Driver”
“[ 24.836] ABI class: X.Org Video Driver” version 20.0
[ 24.836] (II) RADEON: Driver for ATI Radeon chipsets:
[ 24.855] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 24.855] (II) FBDEV: driver for framebuffer: fbdev
[ 24.855] (II) VESA: driver for VESA chipsets: vesa
[ 24.888] (II) [KMS] Kernel modesetting enabled.
[ 24.888] (WW) Falling back to old probe method for modesetting
[ 24.889] (WW) Falling back to old probe method for fbdev
[ 24.889] (II) Loading sub module “fbdevhw”
[ 24.889] (II) LoadModule: “fbdevhw”
[ 24.929] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 24.962] (II) Module fbdevhw: vendor=“X.Org Foundation”
“[ 24.962] compiled for 1.18.3” module version = 0.0.2
“[ 24.962] ABI class: X.Org Video Driver” version 20.0
[ 24.962] (WW) Falling back to old probe method for vesa
[ 24.962] (II) RADEON(0): Creating default Display subsection in Screen section
" ““Default Screen Section”” for depth/fbbpp 24/32"
[ 24.962] (==) RADEON(0): Depth 24 (–) framebuffer bpp 32
[ 24.962] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.962] (==) RADEON(0): Default visual is TrueColor
[ 24.962] (==) RADEON(0): RGB weight 888
[ 24.962] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 24.962] (–) RADEON(0): Chipset: “ATI Radeon HD 2400 XT” (ChipID = 0x94c1)
[ 24.963] (II) Loading sub module “fb”
[ 24.963] (II) LoadModule: “fb”
[ 24.963] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.974] (II) Module fb: vendor=“X.Org Foundation”
“[ 24.974] compiled for 1.18.3” module version = 1.0.0
“[ 24.974] ABI class: X.Org ANSI C Emulation” version 0.4
[ 24.974] (II) Loading sub module “dri2”
[ 24.974] (II) LoadModule: “dri2”
[ 24.974] (II) Module “dri2” already built-in
[ 24.974] (II) Loading sub module “exa”
[ 24.974] (II) LoadModule: “exa”
[ 24.974] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 24.975] (II) Module exa: vendor=“X.Org Foundation”
“[ 24.975] compiled for 1.18.3” module version = 2.6.0
“[ 24.975] ABI class: X.Org Video Driver” version 20.0
[ 24.975] (II) RADEON(0): KMS Color Tiling: enabled
[ 25.080] (II) RADEON(0): Output DIN disconnected
[ 25.080] (II) RADEON(0): Output DVI-0 disconnected
[ 25.080] (II) RADEON(0): Output DVI-1 connected
[ 25.080] (II) RADEON(0): Using exact sizes for initial modes
[ 25.080] (II) RADEON(0): Output DVI-1 using initial mode 1440x900 +0+0
[ 25.080] (II) RADEON(0): Using default gamma of (1.0 1.0 1.0) unless otherwise stated.
[ 25.080] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: s:10000000 visible:f797000
[ 25.080] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 25.080] (==) RADEON(0): DPI set to (96 96)
[ 25.080] (II) Loading sub module “ramdac”
[ 25.080] (II) LoadModule: “ramdac”
[ 25.080] (II) Module “ramdac” already built-in
[ 25.080] (II) UnloadModule: “modesetting”
[ 25.080] (II) Unloading modesetting
[ 25.081] (II) UnloadModule: “fbdev”
[ 25.081] (II) Unloading fbdev
[ 25.081] (II) UnloadSubModule: “fbdevhw”
[ 25.081] (II) Unloading fbdevhw
[ 25.081] (II) UnloadModule: “vesa”
[ 25.081] (II) Unloading vesa
[ 25.081] (–) Depth 24 pixmap format is 32 bpp
[ 25.097] (II) RADEON(0): [DRI2] Setup complete
[ 25.097] (II) RADEON(0): [DRI2] DRI driver: r600
[ 25.097] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 25.097] (II) RADEON(0): Front buffer size: 5088K
[ 25.097] (II) RADEON(0): VRAM usage limit set to 223570K
[ 25.101] (==) RADEON(0): DRI3 disabled
[ 25.101] (==) RADEON(0): Backing store enabled
[ 25.101] (II) RADEON(0): Direct rendering enabled
[ 25.101] (II) EXA(0): Driver allocated offscreen pixmaps
[ 25.101] (II) EXA(0): Driver registered support for the following operations:
[ 25.101] (II) Solid
[ 25.101] (II) Copy
[ 25.101] (II) Composite (RENDER acceleration)
[ 25.101] (II) UploadToScreen
[ 25.101] (II) DownloadFromScreen
[ 25.101] (II) RADEON(0): Acceleration enabled
[ 25.101] (==) RADEON(0): DPMS enabled
[ 25.101] (==) RADEON(0): Silken mouse enabled
[ 25.110] (II) RADEON(0): Set up textured video
[ 25.110] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 25.110] (II) RADEON(0): [XvMC] Extension initialized.
[ 25.110] (II) RADEON(0): RandR 1.2 enabled ignore the following RandR disabled message.
[ 25.175] (–) RandR disabled
[ 25.253] (II) SELinux: Disabled on system
[ 28.826] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.826] (II) AIGLX: enabled GLX_ARB_create_context
[ 28.826] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 28.826] (II) AIGLX: enabled GLX_EXT_create_context_es{ 2}_profile
[ 28.826] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28.826] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 28.826] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 28.826] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 28.826] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 28.826] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 28.826] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 28.828] (II) AIGLX: Loaded and initialized r600
[ 28.828] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28.829] (II) RADEON(0): Setting screen physical size to 381 x 238
[ 32.354] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 32.354] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 32.354] (II) LoadModule: “evdev”
[ 32.355] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 32.368] (II) Module evdev: vendor=“X.Org Foundation”
“[ 32.368] compiled for 1.18.1” module version = 2.10.1
“[ 32.368] Module class: X.Org XInput Driver”
“[ 32.368] ABI class: X.Org XInput driver” version 22.1
[ 32.368] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 32.368] () Power Button: always reports core events
[ 32.368] () evdev: Power Button: Device: “/dev/input/event1”
[ 32.368] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 32.368] (–) evdev: Power Button: Found keys
[ 32.368] (II) evdev: Power Button: Configuring as keyboard
[ 32.368] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1”
[ 32.368] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD id 6)
[ 32.368] () Option “xkb_rules” “evdev”
[ 32.368] () Option “xkb_model” “pc105”
[ 32.368] () Option “xkb_layout” “pl”
[ 32.409] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 32.409] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 32.409] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 32.409] () Power Button: always reports core events
[ 32.409] () evdev: Power Button: Device: “/dev/input/event0”
[ 32.409] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 32.409] (–) evdev: Power Button: Found keys
[ 32.409] (II) evdev: Power Button: Configuring as keyboard
[ 32.409] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0”
[ 32.409] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD id 7)
[ 32.409] () Option “xkb_rules” “evdev”
[ 32.409] () Option “xkb_model” “pc105”
[ 32.409] () Option “xkb_layout” “pl”
[ 32.411] (II) config/udev: Adding input device LITEON Technology USB Keyboard (/dev/input/event2)
[ 32.411] () LITEON Technology USB Keyboard: Applying InputClass “evdev keyboard catchall”
[ 32.411] (II) Using input driver ‘evdev’ for ‘LITEON Technology USB Keyboard’
[ 32.411] () LITEON Technology USB Keyboard: always reports core events
[ 32.411] () evdev: LITEON Technology USB Keyboard: Device: “/dev/input/event2”
[ 32.412] (–) evdev: LITEON Technology USB Keyboard: Vendor 0x45e Product 0x78c
[ 32.412] (–) evdev: LITEON Technology USB Keyboard: Found keys
[ 32.412] (II) evdev: LITEON Technology USB Keyboard: Configuring as keyboard
[ 32.412] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:045E:078C.0002/input/input5/event2”
[ 32.412] (II) XINPUT: Adding extended input device “LITEON Technology USB Keyboard” (type: KEYBOARD id 8)
[ 32.412] () Option “xkb_rules” “evdev”
[ 32.412] () Option “xkb_model” “pc105”
[ 32.412] (**) Option “xkb_layout” “pl”
[ 35.003] (II) RADEON(0): EDID vendor “BNQ” prod id 30725
Wybaczcie długi wpis ale nie mam pojęcia co jest ważne.
Usunąłem pełno wpisów o trybach rozdzielczości.
Pewnie coś z paczką linux-firmware. Sprawdź w synapticu, czy ona w ogóle jest zainstalowana. Jeśli nie, to ją zainstaluj, restart maszyny i spróbuj wtedy z myszą.
Wcześniej system miałem na 2 dyskach fizycznych, podłączonych do dodatkowego kontrolera na PCI.
Trochę małe i bałem się o awarię oraz mało miejsca w obudowie.
Zakupiłem nowy większy na SATA.
Na nowym dysku zainstalowałem OpenSuse (bo miał kłopoty z kontrolerem na PCI)
i spod niego, w Gperted “sklonowałem” po kolei partycje Minta.
Następnie uruchomiłem instalację Minta z płyty wskazując odpowiednie partycje ale nie formatując!
Liczyłem, że instalacja wszystko sama naprawi i ustawi, a zachowane zostaną ustawienia i aplikacje.
Wszystko poszło ładnie poza myszką i brakiem dostępu do Suse…
doinstalowałem, zrestartowałem ale mysz nadal nie działa