zainstalowałem ubuntu 9.10 lecz nie widzi mi sieci wifi ani lan w ifconfig widnieje tylko “lo” prosze o pomoc.
Laptop Acer Extensa 5635zg
@roobal i zaraz kolega się utwierdzi w przekonaniu, że na pomoc od “społeczności linuksa nie ma co liczyć” ale niestety masz rację… opis problemu jest “dużo mówiący”
@Gacek89 - co za karta tam siedzi?? bo to co znalazłem w necie “wifi b,g,n” nic nie mówi.
tu znajdziesz info - https://bugs.launchpad.net/ubuntu/+sour … bug/526246 że wifi tego lapka działa na sterowniku ath9k, który chyba jest w ubuntu od jakiegoś czasu?
Na sam początek, pokaż wynik:
ifconfig -a
wiem że to robiłeś ale wydaje mi się że zapomniałeś parametru -a. I pokaż również:
lspci -vkrzysztof@krzysztof-laptop:~$ ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:240 (240.0 B) TX bytes:240 (240.0 B)
krzysztof@krzysztof-laptop:~$ lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, fast devsel, latency 0
Capabilities:
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cc000000-ceffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1800 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1820 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at f0404800 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: be000000-be0fffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: be100000-be1fffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1840 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1860 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1880 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 18a0 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f0404c00 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Capabilities:
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0
Capabilities:
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 28
I/O ports at 18f0 [size=8]
I/O ports at 18e4 [size=4]
I/O ports at 18e8 [size=8]
I/O ports at 18e0 [size=4]
I/O ports at 18c0 [size=32]
Memory at f0404000 (32-bit, non-prefetchable) [size=2K]
Capabilities:
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: medium devsel, IRQ 10
Memory at be200000 (64-bit, non-prefetchable) [size=256]
I/O ports at 1c00 [size=32]
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation G98M [GeForce G 105M] (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at 2000 [size=128]
Capabilities:
Kernel modules: nvidiafb
07:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e006
Flags: fast devsel, IRQ 19
Memory at be000000 (64-bit, non-prefetchable) [size=64K]
Capabilities:
Kernel modules: ath9k
09:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: fast devsel, IRQ 17
Memory at be100000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 3000 [disabled] [size=128]
Capabilities:
Kernel modules: atl1c
krzysztof@krzysztof-laptop:~$
Przy próbie naprawy ściągałem sterowniki do kart ze strony acera i próbowałem instalować je poprzez narzędzie do sterowników urządzeń bezprzewodowych z windowsa.
Próbowałem wykonać to co tu pisze http://dtbaker.com.au/random-bits/ubunt … v-c0-.html ale jest problem ze ściągnięciem tego pliku.
z laniem nic nie kombinowałem, jak podłącze kabel to nawet diody się nie świeca.
Co do tego jaki mam sterownik sam nie wiem …
windows twierdzi ze:
Atheros AR8131 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
Karta Atheros AR5B91 Wireless Network Adapter
ubuntu:
Attansic Technology Corp. Device 1063
Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express)
pudełko:
Acer nplfty …
Spróbuj załadować moduł:
sudo modprobe ath9k
i sprawdź poleceniem ifconfig -a czy karta jest wykrywana.
Pozdrawiam!
wystąpiło jakieś ostrzeżenie i nie zadziałało
krzysztof@krzysztof-laptop:~$ sudo modprobe ath9k
[sudo] password for krzysztof:
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
krzysztof@krzysztof-laptop:~$ ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:240 (240.0 B) TX bytes:240 (240.0 B)
Pozdrawiam
Zrób:
sudo modprobe ath9k atl1c
A następnie podaż:
lspci -v
I
ifconfig -a
Któreś z nich powinno zaskoczyć eth albo wlan, masz Ubuntu 9.10? Spotkałem się już raz z problem nieładowanych modułów, to chyba jakiś bug w 9.10.
nie podziałało
krzysztof@krzysztof-laptop:~$ sudo modprobe ath9k atl1c
[sudo] password for krzysztof:
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
FATAL: Error inserting ath9k (/lib/modules/2.6.31-14-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko): Unknown symbol in module, or unknown parameter (see dmesg)
krzysztof@krzysztof-laptop:~$ lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, fast devsel, latency 0
Capabilities:
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cc000000-ceffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1800 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1820 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at f0404800 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: be000000-be0fffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: be100000-be1fffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1840 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1860 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1880 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 18a0 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f0404c00 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Capabilities:
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, medium devsel, latency 0
Capabilities:
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 28
I/O ports at 18f0 [size=8]
I/O ports at 18e4 [size=4]
I/O ports at 18e8 [size=8]
I/O ports at 18e0 [size=4]
I/O ports at 18c0 [size=32]
Memory at f0404000 (32-bit, non-prefetchable) [size=2K]
Capabilities:
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: medium devsel, IRQ 10
Memory at be200000 (64-bit, non-prefetchable) [size=256]
I/O ports at 1c00 [size=32]
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation G98M [GeForce G 105M] (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at 2000 [size=128]
Capabilities:
Kernel modules: nvidiafb
07:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e006
Flags: fast devsel, IRQ 19
Memory at be000000 (64-bit, non-prefetchable) [size=64K]
Capabilities:
Kernel modules: ath9k
09:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
Subsystem: Acer Incorporated [ALI] Device 0253
Flags: fast devsel, IRQ 17
Memory at be100000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 3000 [disabled] [size=128]
Capabilities:
Kernel modules: atl1c
krzysztof@krzysztof-laptop:~$ ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:240 (240.0 B) TX bytes:240 (240.0 B)
Tak mam 9.10 ale wcześniej miałem bodajże 9.04 i tez eth nie działał ale wifi działało (chyba) tylko ze nie miałem jeszcze routera to zainstalowałem windowsa
Wykonaj
sudo mv /etc/modprobe.d/ndiswrapper /etc/modprobe.d/ndiswrapper.conf
No to pokaż ten dmesg, pokaż wynik:
dmesg | tail
zaraz po wykonaniu sudo modprobe ath9k.
Pozdrawiam!
krzysztof@krzysztof-laptop:~$ sudo mv /etc/modprobe.d/ndiswrapper /etc/modprobe.d/ndiswrapper.conf
[sudo] password for krzysztof:
krzysztof@krzysztof-laptop:~$ sudo mv /etc/modprobe.d/ndiswrapper /etc/modprobe.d/ndiswrapper.conf
mv: nie mo¿na wykonaæ stat na `/etc/modprobe.d/ndiswrapper': No such file or directory
krzysztof@krzysztof-laptop:~$ sudo modprobe ath9k
krzysztof@krzysztof-laptop:~$ dmesg | tail
[713.249258] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[713.249263] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[713.249268] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[713.249272] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[713.249277] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[713.249281] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[713.338258] ath9k: timeout (100000 us) on reg 0x7044: 0x00000000 & 0x0000000f != 0x00000002
[713.338266] ath9k: Couldn't reset chip
[713.338274] ath9k: Unable to attach hardware; HAL status -5
[713.342240] ath9k 0000:07:00.0: PCI INT A disabled
bez zmian
To jest chyba bug w 9.10, https://bugs.launchpad.net/ubuntu/+sour … bug/407040 , ja bym spróbował wgrać jądro z lucida http://packages.ubuntu.com/lucid/linux- … 16-generic pobierasz dla twojej architektury instalujesz jak normalnego deb-a, następnie reboot i w grubie wybierasz nowe jądro. Jeżeli używasz sterowników nvidia, to również je pobierz dla lucid-a http://packages.ubuntu.com/lucid/nvidia-current
jak instaluje tego deba to ciągle jakiegoś pakietu brakuje jak ściągnę ten pakiet to znów brakuje do niego jakiegoś innego pakietu … idzie jakoś to przyspieszyć? Bo skakanie ciągle na winde i powrotem na ubuntu dużo czasu mi zajmuje a jak narazie nie zainstalowałem żadnego pakietu …
http://www.ubucentrum.net/2010/01/keryx … taluj.html coś takiego, a masz problem z jądrem czy sterownikami nvidia?
z jądrem
Jeszcze jedno, robiłeś w ogóle upgrade system, pewnie nie. Pokaż wynik
uname -r
Porówna się wersję jądra którą masz z tą dostępną w karmic. Jeżeli to dalej nie pomoże to wtedy spróbujemy z lucida.
2.6.31-14-generic
Spróbuj najpierw to http://packages.ubuntu.com/karmic-updat … 15-generic tutaj raczej nie będziesz musiał tyle zależność dociągać, jeżeli to dalej nie pomoże to jutro ci napiszę jak obsłużyć tego keryx-a.
linux-image-2.6.31-15-generic_2.6.31-15.50_i386 zainstalowane, bez zmian ifconfig wygląda tak samo
to jak obsłużyć tego keryx-a??
Rozumiem że reboot zrobiłeś i wybrałeś nowe jądro? A wiec tak na sam początek potrzebujesz plik:
/var/lib/dpkg/status
Kopiujesz go sobie na np. pendrivera. Teraz pobierasz na Window$-sie keryx-a i rozpakowujesz, następnie podmieniasz plik:
projects/karmic-32-bit-default/lists/status
Na twój status. Następnie edytujesz
projects/karmic-32-bit-default/sources/sources.list
I wklejasz taką zawartość, a stare wywalasz:
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://us.archive.ubuntu.com/ubuntu/ lucid main restricted
deb-src http://us.archive.ubuntu.com/ubuntu/ lucid main restricted
## Major bug fix updates produced after the final release of the
## distribution.
deb http://us.archive.ubuntu.com/ubuntu/ lucid-updates main restricted
deb-src http://us.archive.ubuntu.com/ubuntu/ lucid-updates main restricted
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://us.archive.ubuntu.com/ubuntu/ lucid universe
deb-src http://us.archive.ubuntu.com/ubuntu/ lucid universe
deb http://us.archive.ubuntu.com/ubuntu/ lucid-updates universe
deb-src http://us.archive.ubuntu.com/ubuntu/ lucid-updates universe
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://us.archive.ubuntu.com/ubuntu/ lucid multiverse
deb-src http://us.archive.ubuntu.com/ubuntu/ lucid multiverse
deb http://us.archive.ubuntu.com/ubuntu/ lucid-updates multiverse
deb-src http://us.archive.ubuntu.com/ubuntu/ lucid-updates multiverse
## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb http://us.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse
# deb-src http://us.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse
## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu lucid partner
# deb-src http://archive.canonical.com/ubuntu lucid partner
deb http://security.ubuntu.com/ubuntu lucid-security main restricted
deb-src http://security.ubuntu.com/ubuntu lucid-security main restricted
deb http://security.ubuntu.com/ubuntu lucid-security universe
deb-src http://security.ubuntu.com/ubuntu lucid-security universe
deb http://security.ubuntu.com/ubuntu lucid-security multiverse
deb-src http://security.ubuntu.com/ubuntu lucid-security multiverse
Następnie włączasz Keryx-a z pliku /win32/keryx.exe i wybierasz projekt karmic-32-bit, na pytanie dajesz tak. Ostatecznie na liście znajdujesz i dajesz download:
linux-image-2.6.32-16-generic
Dodam że u mnie nie działa wyszukiwarka i musiałem ręcznie przewijać i szukać. Następnie kopiujesz całą zawartość katalogu
/projects/karmic-32-bit-default/packages
Na np. pendrivera i instalujesz za pomocą:
sudo dpkg -i –force-depends *.deb
Oczywiście najpierw za pomocą cd przechodzisz do katalogu gdzie masz te pakiety. P.S. jeżeli masz system 64 bitowy to wszędzie zmieniasz 32-bit na 64-bit